456393530_10220659649959666_6549807604261517875_n.jpg
456278409_10220659650399677_898461964480225737_n.jpg
456165337_10220659649799662_1340996981707837924_n.jpg
456393530_10220659649959666_6549807604261517875_n.jpg
456278409_10220659650399677_898461964480225737_n.jpg
456165337_10220659649799662_1340996981707837924_n.jpg

1/32 Fokker Strut Forming Tool

$18.50

The strut smasher returns! This tool allows you to form airfoil-shaped struts from thin-walled brass tubing, up to 60mm long. Place a length of 1.4mm Ø tubing in the slot, snap the two halves together, and insert into a vice to smash the tubing to shape. Made from tough resin, it should hold up for many uses.

Quantity:
Add To Cart

The strut smasher returns! This tool allows you to form airfoil-shaped struts from thin-walled brass tubing, up to 60mm long. Place a length of 1.4mm Ø tubing in the slot, snap the two halves together, and insert into a vice to smash the tubing to shape. Made from tough resin, it should hold up for many uses.

The strut smasher returns! This tool allows you to form airfoil-shaped struts from thin-walled brass tubing, up to 60mm long. Place a length of 1.4mm Ø tubing in the slot, snap the two halves together, and insert into a vice to smash the tubing to shape. Made from tough resin, it should hold up for many uses.

You Might Also Like

1/32 Albatros D series Louvers
$5.50
1/32 Albatros Ladder and Trestle Set
$27.50
1/32 German Magneto Set
$10.50
1/32 Albatros D.V/a Spinner for Axial Prop
$9.50
1/32 Scale T&B Radiator and Upper Wing Center Section for LVG C.VI
$46.50
Sold Out