1/32 Macchi C.202 Main Landing Gear Legs
14 parts to assemble both left and right landing gear legs including door supports, replacing kit parts 21c, 22c, 35pe (x2), 59c, 60c, 61c, 62c 63c, 64c, 65c, 66c, & 84c (x2).
Hollow design with 1mm steel pins for super strength. Pins included.
Separate upper knuckle allows assembly of landing gear after model is painted (!)
Made of premium, super high strength resin.
Finely detailed door support brackets and torque link.
Separately rendered brake lines in resilient resin.
Will work with the kit wheels or my aftermarket wheels and tires without modification.
Please note wheels and tires sold separately.
Assembly Hints
To ease the fit of the pin, chase the three main gear leg components with a series of drill bits starting with .95mm and working up to 1.1mm. Take care handling the door supports; the lowermost one (the one attached above the fork) in particular is a bit fragile until the gear door is assembled. Remember that the upper kingpins should be installed before the bulkhead is joined to the lower wing in step 9, but the rest of the leg assembly can be set aside until later, as can kit parts 52c & 53c.
